Services

Audi head gasket replacement for coolant loss, overheating, and oil/water mixing (mayonnaise under cap, pressure in hoses, or repeated top-ups). We pressure-test the cooling system, check compression, and inspect for leaks so the root cause is confirmed before stripping. Where required we assess the cylinder head surface and sealing condition, then reassemble using correct parts and torque procedures. Final checks include coolant bleeding, temperature verification, and a road-test (where applicable) for lasting reliability.

Audi timing chain replacement for start-up rattle, timing correlation faults, and chain stretch. We inspect guides/tensioners, verify timing, and replace worn components to OEM spec. Expect clear advice, clean workmanship, and post-repair checks.

Audi turbo replacement for low boost, smoke, limp mode, or whistle noises. We check boost leaks, oil feed/return health, and actuator operation before fitting a replacement turbo. Proper priming, correct gaskets, and performance verification included.

Audi engine repair focused on fixing the fault—not upselling a full replacement. We diagnose accurately, then repair common issues like oil leaks, misfires, timing faults, and cooling problems. Transparent estimates and professional procedures for dependable results.

Audi engine replacement with supply & fit options for used or reconditioned engines. We match engine codes, confirm compatibility, and advise on ancillaries to reduce surprises. Careful installation, pre-start checks, and handover guidance included.

Audi engine swaps with compatibility checks, engine-code matching, and planning for supporting parts. We advise on ECU coding/immobiliser considerations and any wiring or sensor differences. A structured approach to help swaps run reliably and legally.

Audi engine rebuild for worn engines, oil consumption, low compression, or internal damage. We strip, measure, and rebuild with quality parts and correct tolerances. Detailed fault explanation, realistic timelines, and post-rebuild checks for peace of mind.

Audi engine diagnostics to pinpoint the real cause of warning lights, misfires, smoke, or power loss. We combine scan data with testing (smoke test, pressure checks, live data) to confirm the fault. Clear next steps and a repair plan you can trust.

Reconditioned engine supply & fit for Audi models with compatibility checks and engine-code matching. We plan ancillaries, fluids, and pre-install inspections to reduce risk. Professional fitting, correct procedures, and post-install verification included.

Audi used engine supply with checks on mileage, engine code, and condition. We help verify compatibility and advise what ancillaries to reuse or replace. Sourced for reliability, with clear communication and delivery support across the UK.

Audi reconditioned engine sales with clear engine-code matching and compatibility guidance. Built for long-term reliability, with support on ancillaries and installation planning. A practical option when repair isn’t cost-effective or time is critical.

Audi overheating repair with cooling-system diagnostics to stop repeat breakdowns. We check for leaks, pressure loss, coolant flow issues, and underlying causes like thermostat/water pump faults. Correct repair, proper bleeding, and stable temperature verification.

Audi oil leak repair to stop drips, burning smells, and low oil warnings. We trace leaks accurately (not guess), then repair common points like seals, gaskets, and housings. Clean, professional work with advice to prevent future leaks.

Audi knocking noise diagnosis and repair for bottom-end knocks, tapping, or sudden engine noise. We assess oil pressure, bearings, timing components, and related faults to identify the cause. Honest advice on repair vs rebuild to protect your budget.

Audi injector testing and replacement for misfires, rough idle, fuel trim faults, and poor economy. We confirm injector performance before replacing parts and check for related issues. Correct coding/setup where needed, plus a smooth-running final check.

Audi fuel pump diagnostics and replacement for no-starts, low fuel pressure, and hesitation under load. We test fuel pressure delivery and rule out electrical faults before fitting. Reliable parts, correct installation, and validation drive checks included.

Audi EGR valve repair/replacement for power loss, smoke, warning lights, and soot-related issues. We diagnose the system properly and address contributing causes where possible. Clean installation, correct adaptation (if required), and improved drivability.

Audi DPF cleaning/replacement for blockage, failed regenerations, smoke, and DPF warning lights. We confirm soot/ash loading and diagnose the cause of repeated regens. A safe, compliant solution with advice to keep the DPF healthy.

Audi intake manifold repair for swirl flap issues, vacuum leaks, and airflow-related faults. We diagnose performance symptoms and replace/repair affected components to restore correct airflow. Cleaner running, fewer fault codes, and improved response.

Audi radiator replacement for leaks, poor cooling performance, or repeated overheating. We inspect the cooling system, replace the radiator correctly, and refill/bleed the system properly. Stable operating temperature and leak-free checks before handover.

Audi water pump replacement for coolant leaks, overheating, or poor circulation. We check related components (thermostat, belts, housings) and use correct procedures for your engine. Proper bleeding and temperature validation to prevent repeat failures.

Audi thermostat replacement for temperature regulation issues, slow warm-up, or overheating. We confirm the fault with diagnostics and coolant temp data before replacing. Correct fitment, coolant refill, and stable temp checks included.

Audi cylinder head repair/skimming for warping, sealing issues, or head gasket failure. We assess damage, restore correct sealing surfaces, and refit with correct torque procedures. A reliability-focused repair with checks to prevent recurrence.

Audi internal engine repair for piston damage, bearing wear, and crankshaft issues. We diagnose the cause (oil pressure, detonation, overheating), then repair with proper tolerances. Clear options for repair vs rebuild based on condition and cost.

Audi clutch replacement for slipping, judder, heavy pedal feel, or poor engagement. We diagnose related issues (DMF, hydraulics) to avoid repeat problems. Correct parts, clean install, and road-test verification for confident shifting.

Audi gearbox repair/replacement for noises, slipping, harsh shifts, or warning lights. We assess the fault path (mechatronics, clutch packs, sensors) and recommend the best route. Clear advice, quality workmanship, and post-repair checks.

Audi ECU diagnostics and repair for intermittent faults, non-starts, immobiliser problems, and coding issues. We test power/ground, scan for fault patterns, and advise on repair vs replacement. Practical fixes with clear communication and next steps.

Audi starter motor replacement for clicking, slow cranking, or intermittent starting issues. We confirm battery/charging health and cable connections before replacing. Correct fitment and start-test validation so you can rely on every start.

Audi alternator replacement for low voltage, battery warning lights, and charging faults. We test charging output and belt/drive issues before replacing. Proper installation and voltage verification to protect your battery and electronics.